Відео

Excellent!

Very informative video I appreciate your time you have learned me a lot especially about the differents in low side and high how to trouble shoot

Clear, concise and professional, as ALWAYS! NICE JOB 👏👏👏

Many thanks Rich! Superb demo!

Do you need to loosen the bolts on the frame to release pressure or smth on the DS after you replaced the DS Dog Bone Mount? In another film for the Dog Bone Mount on the PS it was done, but in this film (on the DS) - not. Thank you for the great film.

@4:50 Do you need to loosen those bolts on the DS after you replaced the DS Dog Bone Mount? Thank you for the great film.

Olive spoon

It's either the intake valve or the exhaust valve

generally if you have that kind of resistance the blower motor is working harder than it needs to be and is simply wearing out. When my blower locked up one day it took out the resistor pack with it

Don't work

Thanks!

I have a red warning light that looks like a radiator but my gauge doesn’t move or it overheats, any suggestions?

Better than the Haynes manual!

Valve

i think a valve

I’ll be sure to mahk my screws. Jk great vid, thanks!

Flux capacitor duhhh

Valve

Codes I have for my 2009 Chevy Impala LT 3.5 already changed the gas cap already changed the front solenoid purge valve in the engine and these are the codes tha t I'm still getting PO442 PO451 PO454 PO464 N P162B n A C0040 which is the speed sensor the ABS traction control and stability light comes on so already ordered a front passenger hub bearing hub bearing new rotors new brakes already checked the wiring harnesses they're good but as for the EVAP codes I have no idea that's the only thing I did not change yet it is June 8th 2024 and I just bought this traded it in because I had very low mileage for 15 years old 90,000 MI the engine runs fine no misfires just when I make left hand turns no check engine light comes on but the ABS and traction control light comes on so hopefully the hub bearing will fix that but the performance is good it doesn't stall out I'm wondering why I'm getting false codes like I said I already put a new gas cap on their and the engine purge valve so I'll try and put what you just did

Man, you replace that mount and it's like you're driving a brand new car! Avoid the "frowny" mount as they are garbage.

I would only do this if i needed to service other things that were only accessible thru the pax side wheel well. Oil change is so easy on these cars, takes about 20 minutes.

no idea how much i needed this video until i tried doing it myself lol

Compressors are like $120 why would anyone do this?

Will it lock again when you close it?

Look for the one in on the engine

thx blud

Is this the same for the 2003 Saturn L200?

I guess at least it’s telling you there’s some oil in there 🤷‍♂️

Thank you man time to go show my father in law I know how to take the radio out haha !

Kind of late to the party but I picked up a 99’ SL1 base. What are all the parts needed to install this? Thanks!

Thank you! I hope my 2010 PCM is in the same location!

ughhhhhhhhh so i have to take the entire dashboard apart just to replace an ac switch.......

Thank you, my 98 tracer is similar

6/1/2024 still do good work, thank you.

Those switches CAN BE so difficult!! BUT, you make it look like BUTTER!!! I really have admired your work over the years...and learned so much (not to mention, saved SO MUCH TIME)!!! Thanks, Buddy!!! Nort Carolina salutes You!!!

So where in the f*** did you locate that so I can do what you're doing? I'm glad everybody is here that just knows exactly what to do already.....

You are a national treasure. Thank you for all of these videos.

Using the tool battery to lower the window, and then switching polarity to roll it up was my favorite part! So exciting seeing operations performed alternatively so that the mind can better visualize the nature of parts. I now understand the motor that much better. ❤

Went through all the steps and cleaned out everything with carb cleaner. Code still came back in my 2002 Saturn SL1

I will change mine, the mechanic costs me a life ,,, Dakota 2002 80,000 millas

Best video ever. Thank you for making it.

great ep!

Добрый день. Из-за этих резисторов может тускнеть на табло?

What if you dont have the key?

But my key won’t turn so how can I shift the gear down

Bro just scratching up cover plates lol...hope this a junkyard car 🤦‍♂️

Thanks for sharing

Kindly confirm that you had both the high pressure valve and the low pressure valve shut while you were running the A/C and taking the pressure measurement. I had thought that the gauges will not sense the pressures in the line if the valves are not open.

This video was very helpful to your female demographic!! I greatly appreciate it😊

Hey Great video ! Is there a need to get the new key programmed or anything ?